As the automobile age, and foreign and unpleasant odor problems can be a problem.In most cases, more offensive odor is caused by spilled liquid or otherwise allow access to these places to stay in the form of car mold and mildew, creating unpleasant scent.While water leaks or water through the open windows into the mold may also be evident in the form ofthe problem is not to create a conspicuous place, and the ventilation system in the car.This water is the most common occurs when the accumulation of condensation cool, air-conditioning air through the hot, humid days, the results of the ventilation system transfer.
Instructions:
Determine whether the problem is in the air in the ventilation system
STEP 1
Engine start and shut down the windows.Car ventilation system settings "vent 'and from the car. Set the fan at high speed air flow.
Step 2
If it is within the ventilation system in the accumulation of mold you will immediately sense the strong, unpleasant smell like vinegar.
Step 3
If there is no odor, switch from internal to external vehicle flow, stay in the high-set fan.Check smell like vinegar.If there is no odor problem is not in the ventilation system.
Step 4
If a strong smell of acetic acid vinegar or similar results of the above steps is a mildew or mold problems in the ventilation system.For the first 2.
Clean ventilation system
STEP 1
Found in the fresh air on your car into the portal.This is most often found at the bottom of the windshield, the top cover.
Step 2
Start the engine, set the high air ventilation system fan speed.Set loop control draw outside air.This is the outside air environment is very important.
Step 3
With the engine running and the ventilation system above the choice of setting, the fresh air of the windshield, both intake portal generous spray of Lysol.Spray Pump 10 to 12 times, on each side.
Step 4
Car smell you will work through the system of disinfection methods and in and moldy odor.
Step 5
On the car, where the ventilation holes on both sides, in the middle of the dashboard of a car shop vacuum nozzle.Use a vacuum to assist in the development of disinfectant throughout the system.
Step 6
Repeat step 5 in all vents.
Step 7
Allows the system to run and circulation for the 10 to 12 minutes disinfection.If the odor persists repeat acetic acid disinfectant spray additional process.
Step 8
10 to 12 minutes after the cut off air ventilation system and stop the engine.From the inside, to each spray disinfectant inside air vent.With a clean cloth to wipe the excess.
